Supplying termpower (scsi Drive Only) To supply termpower to the bus, locate one of the five jumpers shipped with the drive and place it on the scsi ID connector as shown in the following figure.
If you are uncertain about whether the temperature of the drive is within the recommended operating range or the humidity is sufficient to cause condensation, acclimate the drive for the full four hours.
To copy the dump, see Function Code 5: Copy Drive Dump on page.
Copyright Tandberg Data All rights reserved.Make sure that the ID is not being used by another device.To half the test, press the Unload Button.ADI: Do not forward RES when not ready.If multiple errors occur, the code with the highest priority (represented by the lowest number) displays first.
After you select the function, 7 flashes and the drive automatically starts the test.
Tape storage systems consist of three critical components: hardware, software, and tapes, and even low-end drives can store up to 300 megabytes of data.
If the server s net (compressed) data rate is between two of the preceding native data rates, the drive calculates the appropriate data rate at which to operate.
LUN0 command hang in queue, read perm fix, head Stopper interferes with Threader while a clean is being conducted causing a stuck cleaner tape.
This converts the cartridge into a valid scratch (blank) data cartridge.12 Ultrium LTO 3 Tape Drive 25 Mount the Drive into the Enclosure The drive may be shipped with or without a front bezel (see 1 in Figure 6).Configure the Drive to the Server, Switch, or Hub To configure the scsi drive to the server, switch, or hub, refer to the documentation for that server, switch, or hub.FSC 1026 cartridge status flag overwritten If the customer issue "write 0" followed by space, the drive may stop read with FSC 6353.V If the update completes successfully, the tape drive rewinds and unloads the FMR tape, resets itself, and is ready to use the new firmware.Make sure that the scsi ID is set to 15 (see Figure 5 on page 11).Users can choose from internal and external models to match their needs.Amber Flashing Amber once per second Flashing Amber once per second Flashing Amber twice per second Flashing Amber twice per second Flashing Amber twice per second Flashing selected function Displaying error code Displaying C Displaying Function Code 8 or Off The drive is executing the.V The Status Light briefly becomes solid amber, then manual de telefono gigaset al140 becomes solid green.